( New Brand) 2 shelves 100% natural ash wood shelves handcrafted for holding amplifiers,Turntable

Sale!

$560.00 $492.00

The above prices are included Free Shipping USA, Canada, Mexico
Customer Global +$20 Shipping fee


Condition: New
Warranty: 3 Years
Colour: cherry
100% natural hard ash wood
Sonic Isolation System Technology
Vectored Resonance Deflection Channels
Environmentally friendly
Designed and manufactured in the Vietnam


Product Incudes:

  • 01 Rack: (layer 1) H 5,8 inch (148mm) x W 26,46 inch (672mm) x D 20,47 inch (520mm)
  • 01 Rack: (layer 1) H 10,63 inch (270mm) x W 26,46 inch (672mm) x D 20,47 inch (520mm)
    Shipping weight: 2 shelves = 46 lbs (21kg)

Accessory: including spikes

79 in stock

SKU: 650447368128-1-1 Categories: ,

Description

audiophile who is looking for the ultimate in musical performance. This visually attractive and beautifully crafted modular support makes a stunning centrepiece and is perfect for both supporting and maximising the performance of quality hifi equipment.

Wood shelves are handcrafted from 100% natural hard ash wood that supports heavy weight. They are fully modular which can easily be assembled or disassembled by pieces and layers, or put together as a whole set.

 

All shelves are 100% natural ash wood, do not affect the environment and have a very long shelf life, the surface of the shelves is 20mm thick (0.80 inches), surrounded 60mm (2.36 inches). The surface is finished with a very smooth Finishing Paint that makes it very easy to clean, because this certainty will help you have a product that lasts forever,

Please note: ash wood natural material, so block colour variation, knots and grain texture is part of the intrinsic beauty of this hifi support. Every shelf module is therefore aesthetically unique and will darken over time as part of the woods ageing process, especially if exposed to sunlight.

Securely Support Your Power Amp

Get your power amp up and off the floor with the Lansing Audio Amp Stand. It provides solid support for power amps, monoblock amps, and other heavy gear at just the right height. The open-air design is best for your electronics. The design maximizes component ventilation and makes it easy to install or remove gear.

rack ash wood features innovatively designed cone point feet and spikes. The steel floor spikes go all the way through the cones and into the bottom shelf tubes for greater strength and better energy transfer from the rack into the floor. with a choice of three interchangeable leg heights capable of supporting equipment up to 80kg (176 lbs) per level. The powder high gloss legs Made of stainless steel 304 fitted to the shelf modules, dampening stainless steel 304 steel studs with aerospace grade stainless steel 304 grounding components matched to full adjustable 8mm steel spikes. These components are designed to both dampen and then allow residual high frequency resonance reflection to be channelled away from the supported AV components so allowing them to deliver maximum performance.

TECHNICAL SPECIFICATION

(2 shelves) 100% natural ash wood shelves handcrafted for holding amplifiers

manufacturer: Lansing Audio Inc
product name: Rack Ash wood
product type: HiFi-Rack / hifi rack
system: modular
wood colour: Cherry
colour of column modules (standard):
the surface thickness (standard): 20 mm (0.80 inches)
surrounded thickness : 60mm (2.36 inches)

Product Incudes:

  • 01 Rack: (layer 1) H 5,8 inch (148mm) x W 26,46 inch (672mm) x D 20,47 inch (520mm)
  • 01 Rack: (layer 1) H 10,63 inch (270mm) x W 26,46 inch (672mm) x D 20,47 inch (520mm)
    Shipping weight: 2 shelves = 46 lbs (21kg)

Accessory: including spikes

Shipping Deliver

All parcels Always are mailed within 24 hours of your payment received.
Vietnam postal never hold any outgoing international parcels on the US side; they are out of the vietnam country at most within 3 day.
I had been keep asking by international buyers the same questions “ where is my parcel ? how come takes this long time ? “. Almost 100% of the delay on deliveries is due to the import country’s slow custom hold process. Sadly, we, as the shipper can’t do anything about to speed it up; this delay is very common for South American countries (such as Brazil, Chile, Peru, etc) and the former Eastern European countries (such as Russia, Hungary, Poland, and the former Soviet independent states/countries). The usual delivery time to these countries is about 10 days to 22 days; few parcels even took 30 days. All of our products are sent via courier service, to ensure the fastest time the product reaches the user as quickly as possible.

At last, foreign import duties, taxes and charges are Not Included in the item price or shipping cost. It is the Buyer’s Responsibility.

Description

Additional information

Dimensions 21.1 × 23.1 × 5.1 in

You may also like…

Leave a Reply

Your email address will not be published. Required fields are marked *